Description
Clearcom HME DX410
Item Includes
- DX410 wideband 7KHz, two channel base station w/2 antennas 1 unit
- 115-230 VAC power supply, includes power cord. 1 Unit
- BP410 belt packs with 8 AC50 batteries 4 Unit
- CC-15-MD4 single ear noise canceling headsets 5 Unit
- AC50 battery charger 1 Units
- 110-240VAC power supply, with US adapter plug. For US and Canada sales.
Features
BS410 Features:
- Two-channels
- 7kHz wideband audio
- 2-wire and 4-wire bridging
- 2-wire auto-nulling
- Lost packet concealment
- Upgraded radio
- Supports up to 15 beltpacks and/or wireless headsets
BP410 Features:
- Two-channel
- 7kHz wideband audio
- Up to 15 beltpacks and/or all-in-one handsets on a single system
- Single or dual-channel operation
- Up to 12 hours of battery life
AC50 Features:
- Charges 4 batteries simultaneously
- 4 additional battery storage slots
- LED status indicator lights
- Green LED status indicator on top and bottom
Specifications
BS410
Audio
- Channels: 2 audio channels
- Capacity: Up to 15 BP410 and/or WH410 per base station
- Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
- Radio Frequency Range: 2400 – 2483.5 MHz
- Audio Frequency: 200 Hz – 7kHz
- 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
- 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
- Aux Input: XLR-3F with ¬” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
- Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
- Headset Connector: 4-pin mini-DIN, Electret microphone
- Headset Output: 200mW into 32 Ohms
- Antenna Type: External 1/2-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
- System Distortion: <2%
- Communication Security: 64-bit encryption, dual-slot diversity
Transmitter
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modulation Type: Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
Receiver
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity: <-90dBm w 10-3 BER
- Frequency Stability: 13 ppm
- Distortion: <2%
Power Requirements:
- 100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC
Environmental:
- Temperature: +32°F – +122°F (0°C – +50°C)
Dimensions
- 1.75 x 19.0 x 17.13 in (44 x 483 x 435 mm) (HxWxD)
Weight
- 9 lbs (4.1 kg)
BP410
Audio
- Channels: 2 audio channels
- Frequency Range: 2400 MHz – 2483.5 MHz
- Frequency Response: 200 Hz – 7 kHz
- Antenna: Internal, horizontal/vertical diversity
- Headset Connector: 4-pin, mini-DIN
- Microphone: Electret
- Headset Output: 160mW into 32 Ohms
- Communication Security: 64-bit encryption
- System Distortion: <2%
- Controls: Power, Volume-Up, Volume-Down, A, B, ISO
- Indicators: Dual-color LED (red/green)
- Battery Requirements: 3.6V lithium-ion
- Battery Life: Up to 12 hours
Antenna
- Internal, Horizontal/Vertical diversity
Transmitter
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modes: Momentary or Latch
- Type: Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications
Receiver
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity: <-90dBm w 10-3 BER
- Frequency Stability: 13 ppm
- Distortion: <2%
Environmental
- 32°F to +122°F (0°C to +50°C)
Dimensions
- 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
Weight
- 7.4 oz (0.21 kg) including battery and pouch
AC50
Power Supply
- Wall plug with switchable adapters
- Input Voltage: 85 – 264VAC; 100 – 240VAC; nominal
- Output Voltage: 5V; 3A
- MTBF (min.): 200,000 hours demonstrated
Temperature
- Operating: 32°F – +122°F (0°C – +50°C)
- Storage: -40°F – +176°F (-40°C – +80°C
- Humidity: 0 – 95%, non-condensing
Dimensions
- 5.4in W x1.4in H D (137.2mm x 35.6mm x 162.6mm)
Weight
- 3.5lbs (1.59kg)